BrainMap

Mr. Radu-Cristian Popa

PhD

Researcher, Dept. Director - INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD

Researcher | Manager

Curriculum Vitae (16/10/2019)

Expertise & keywords

Carbon quantum dots: exploring a new concept for next generation optoelectronic devices. Call name: Complex Exploratory Research Projects - PCCE-2011 call
PN-II-ID-PCCE-2011-2-0069 2012 - 2016

Role in this project:

Coordinating institution: National Institute for Research and Development in Microtechnologies IMT-Bucharest

Project partners: National Institute for Research and Development in Microtechnologies IMT-Bucharest (RO); National Institute for Research and Development in Microtechnologies IMT-Bucharest (RO); Faculty of Chemistry and Chemical Engineering, Babes-Bolyai University (RO); Faculty of Physics, Babes-Bolyai University (RO)

Affiliation: National Institute for Research and Development in Microtechnologies IMT-Bucharest (RO)

Project website: http://www.imt.ro/cqd_opto

Abstract:

Carbon nanodots (or Carbon quantum dots, CQDs) represent a newly discovered class of nanocarbon materials, inspiring the gradually expansion of research efforts due to the increasing number of identified favorable properties. In fact, in less than a decade (2004) since their first accidental identification in carbonaceous soot, surface-passivated CQDs are already rivaling the position of traditional semiconductor-based quantum dots as top-performance photoluminescent materials, while offering at the same time radical advantages in usability and production costs. Their immediate application in bioimaging is already ascertained, however scarce studies are employing these materials in non-biological fields, even though reports demonstrating the capacity for photo-induced electron-transfer behavior in CQD leads us to the conclusion that they may additionally hold compelling potential in photovoltaics and CQD-LEDs.

It is the goal of this project to demonstrate for the first time the functionality of optoelectronic devices – LEDs and PVs – based on CQDs by thoroughly understanding from experimental and theoretical point of views the electronic, optical and transport properties of the appropriately passivated CQDs.

Prospective research regarding rapid prototyping processes for applications in the field of micro- and nanosystems realization Call name: Exploratory Research Projects - PCE-2011 call
PN-II-ID-PCE-2011-3-0352 2011 - 2016

Role in this project:

Coordinating institution: Institutul National de Cercetare-Dezvoltare pentru Microtehnologie

Project partners: Institutul National de Cercetare-Dezvoltare pentru Microtehnologie (RO)

Affiliation: Institutul National de Cercetare-Dezvoltare pentru Microtehnologie (RO)

Project website: http://www.imt.ro/3D-rapidpronano/

Abstract:

The Rapid Prototyping (RP) techniques have greatly evolved since their beginings. Their use in the field of micro / nanosystems remains elusive. Novel approaches are needed for overcoming the existing limitations. The objectives of the project are: a) prospecting for rapid prototyping (RP) techniques for making structures and devices at the micro / nanoscale; b) prospecting for RP techniques that lead to the creation of fully 3D nanostructures, especially at the sub-100 nm domain. The objectives will be addressed in two ways: 1) studying the way in which present RP techniques can be used / adapted to achieve the goals; 2) conceiving and developing novel solutions for RP techniques mainly for 3D nanoscale fabrication. For that purpose, the project will address Dip Pen Nanolithography, 3D Selective Laser Sintering, 3D single photon Photopolymerization. Novelty results from: a) these techniques will be used in novel ways; b) these techniques will be used for making new structures, applicable to micro / nanodevices, that were not made up to now and that use the specific features and benefits of these techniques; c) novel techniques will be developed. At the end of the project the team will have a better overview of the applicability of these RP techniques at the micro / nanoscale and will bring new concepts for 3D RP for nanofabrication. Some of the developed ideas will be directly applicable into practice, some will be developed here and put into to practice in other projects.

RESEARCH CENTER FOR INTEGRATED SYSTEMS NANOTECHNOLOGIES AND CARBON BASED NANOMATERIALS Call name:
2010 - 2015

Role in this project: Key expert

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD

Project partners: INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD ()

Affiliation: INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD ()

Project website:

Abstract:

The strategic objective of this project is the creation of a new and modern center within the National Institute for Research and Development in Microtechnologies (in short form, IMT-Bucharest or IMT). The center will have modern facilities and laboratories designed for the development of new research areas with high application potential, in concordance with the best EU models an d strategies. The establishment of the proposed center is an essential component of the Institute’s development strategy.

Integrated system for concurrent electrophysiological and chemical recording at neuronal level - Call name:
PN II 2007 - 2010

Role in this project: Key expert

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD

Project partners: INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD ()

Affiliation: INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD ()

Project website:

Abstract:

This project proposes the development of a complete, integrated system for neural recording, with direct applicability in fundamental and applied neuroresearch. The key target elements of the proposed research are: • the development of a recording microelectrode (Fig. 2) with multiple recording sites, fabricated in silicon based MEMS technology, for combined extracellular electrical recording (action potentials) and electrochemical sensing (pH and dopamine level in the extracellular environment) • development of an adequate coating solution for ensuring a performant mechanical resistance even for longer electrode shanks • improvement of the S/N ratio performance supported by the electrode, by devising a micro/nanostructuring technology on the surface of the recording sites • development of an efficient and optimal fabrication process, with special emphasis on reproducibility, quality, cost • development of the associated electronic circuitry for signal processing, digitization and computer transfer, display and acquisition, such that a ready-to-be-used experimental chain to be realized.

ADVANCED MEDICAL IMAGING SYSTEM FOR DIAGNOSE, GUIDANCE AND PRE- AND INTRA-OPERATIVE INTERVENTION: MODEL, SIMULATION AND ANALYSIS IN VIRTUAL ENDOSCOPY -IMAGMED Call name:
2006 - 2009

Role in this project: Key expert

Coordinating institution: SC ITC - INSTITUTUL PENTRU TEHNICA DECALCUL SA

Project partners: SC ITC - INSTITUTUL PENTRU TEHNICA DECALCUL SA ()

Affiliation: SC ITC - INSTITUTUL PENTRU TEHNICA DECALCUL SA ()

Project website:

Abstract:

This project - of complex type/fundamental and applied research - proposes the development of a modern and complete medical imaging software system, with direct applicability in virtual endoscopy, targeting the development and the increase of the role of this modern method in medical prevention, diagnostic and planning.

DEZVOLTAREA UNOR MODELE EXPERIMENTALE SI NUMERICE DE CARACTERIZARE A MATERIALELOR MAGNETICE CU HISTEREZIS (MATHYS) Call name:
2006 - 2008

Role in this project: Key expert

Coordinating institution: UNIVERSITATEA "ALEXANDRU IOAN CUZA" IASI

Project partners: UNIVERSITATEA "ALEXANDRU IOAN CUZA" IASI ()

Affiliation: UNIVERSITATEA "ALEXANDRU IOAN CUZA" IASI ()

Project website:

Abstract:

Proiectul MATHYST este dedicat dezvoltarii unui set de metode avansate, experimentale si numerice, pentru caracterizarea si modelarea materialelor magnetice cu histerezis scalar si vectorial, care sunt printre cele mai complexe sisteme cunoscute in fizica materialelor. Rezultatele vor fi utile atat pentru elaborarea de noi materiale, inclusiv inteligente, cat si pentru optimizarea proiectarii asistate de calculator in domeniul Ingineriei Electrice, cu consecinte directe asupra miniaturizarii si imbunatatirii performantelor energetice ale dispozitivelor electromagnetice.

Electrophysiological exploration and navigation system for functional neurosurgery Call name:
2003 - 2006

Role in this project: Project coordinator

Coordinating institution: Neurostar GmbH

Project partners: Neurostar GmbH ()

Affiliation: Neurostar GmbH ()

Project website: http://www.neurostar.de

Abstract:

implementation and testing of the 2D vectorial hysteresis feature for EMSolution Call name:
2002 - 2003

Role in this project: Key expert

Coordinating institution: Science Solutions International Lab., Inc.

Project partners: Science Solutions International Lab., Inc. ()

Affiliation: Science Solutions International Lab., Inc. ()

Project website: https://www.ssil.co.jp/

Abstract:

Modeling and simulation of MAGLEV train Call name:
2000 - 2003

Role in this project: Key expert

Coordinating institution: Science Solutions International Laboratory, Inc.

Project partners: Science Solutions International Laboratory, Inc. ()

Affiliation: Science Solutions International Laboratory, Inc. ()

Project website:

Abstract:

FILE DESCRIPTION	DOCUMENT
List of research grants as project coordinator or partner team leader
Significant R&D projects for enterprises, as project manager
R&D activities in enterprises
Peer-review activity for international programs/projects