BrainMap

Mrs. Iulia Elena Neblea

Scientific Researcher

Researcher - Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti

Researcher | PhD student

Expertise & keywords

Next-generation biodegradable filters for water purification and desalination Call name: PNCDI IV, PN4GENERIC-COFUND-2023
COFUND-WATER4ALL-WATER-BIOFIL-1 2024 - 2026

Role in this project:

Coordinating institution: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti

Project partners: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); EDAS-EXIM SRL (RO); Adam Mickiewicz University (PL); PRESSEKO Spolka zo.o. (PL); University of Toulon (FR); MARINE TECH S.A.S (FR)

Affiliation:

Project website:

Abstract:

Water is the most abundant and indispensable resource of our planet. However, freshwater distribution is very different from region to region, which brings with it a very problematic scenario for drinking water availability, especially following hydro-climatic extreme events. One viable and low-cost solution to provide direct access to drinking water, refers to implementing Point-Of-Use (POU) systems for water purification and desalination. Yet, before doing so, the issues identified by end-users/ consumers regarding filters disposal and recycling should be properly addressed. Thereby, the aim of the WATER-BIOFIL project proposal is to design& assemble& test next generation compostable filters, prepared from biodegradable polymers and/or bio-sourced polymers, which can be thereafter integrated in regular POU systems, and further serve their purpose as first-aid tools to cope with hydro-climatic extreme events, while diminishing the environmental impact of hazardous materials. Considering the proposed aim of the project and the transdisciplinary character of the foreseen activities, the project consortium is joining three renowned RDI entities, from Romania, France and Poland, with expertise in materials science and functional biomaterials (as technology developers), and other three SMEs from Romania, France and Poland (as technology integrators), with expertise on water purification and waste management. The six Partners are developing complementary activities according to their expertise and skills to ensure further development and/or build-up a multidisciplinary knowledge in a long-term perspective innovation, value creation and assistance in solving societal challenges. The project proposal addresses the required Polish, French, Romanian and EU impacts, with respect to the objectives of WATER4ALL, on ensuring water security for all and reducing environmental hazards.

New technology for pH sensitive hybrid materials based on halloysite and cyclodextrin for Inflammatory Bowel Diseases treatment Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2021-2488 2022 - 2024

Role in this project:

Coordinating institution: UNIVERSITATEA POLITEHNICA DIN BUCURESTI

Project partners: UNIVERSITATEA NAŢIONALĂ DE ŞTIINŢĂ ŞI TEHNOLOGIE POLITEHNICA BUCUREŞTI (RO); Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); UNIVERSITATEA DE MEDICINA SI FARMACIE "CAROL DAVILA" (RO)

Affiliation:

Project website: https://ghebauradi.wixsite.com/medexibd

Abstract:

The current project aims to contribute to biomedical scientific knowledge meeting also the environment requirements by proposing a new strategy to achieve new pH-sensitive drug delivery with high therapeutic effect for Inflammatory Bowel Diseases (IBD) through the usage of renewable resources as starting materials.

In this context we intend to synthesis several new drug delivery systems for targeted mesalazine release (with therapeutic effect on IBD) based on chemically modified halloysite and cyclodextrin. MEDEXIBD aims to rationally functionalize the structure of the natural clay nanotube and also cyclic polysaccharide in order to obtain methacrylated compounds with increased reactivity who also favors a targeted release of the drug from the final forms into the colon. To accomplish these statements the two types of modified natural compounds will be subsequently reacted together, into a binary system (clay-polysaccharide) using an environmentally friendly photo-chemical polymerization technique using visible radiation obtaining halloysite tubes coated to supramolecular structures of β-cyclodextrin which grace to the vinyl radicals configures a pH sensitive system. Mesalazine active substance will be charged both into the tube and cyclic compounds and the release profile into a colon pH value will be established by well defined tehniques. With two different hosts for the specific drug, the final systems have the ability to inhibit the release of the active substance when they encounter different media with acid or neutral pH and also have a great capacity to exert an immediate therapeutic effect in the affected area. All the promising synthesized drug release systems (after a rigorous selection based on preliminary laboratory evaluation) will be tested in vitro in terms of toxicology, pharmacology, biochemistry and anatomopathology establishing a thorough pharmacotoxicological profile of mesalazine from the pharmaceutical forms formulated and defined by MEDEXIBD.

Environmental responsible composite propellant for unguided propulsive systems Call name: P 2 - SP 2.1 - Proiect de transfer la operatorul economic
PN-III-P2-2.1-PTE-2021-0211 2022 - 2024

Role in this project:

Coordinating institution: COMPANIA NATIONALA ROMARM S.A.

Project partners: COMPANIA NATIONALA ROMARM S.A. (RO); Academia Tehnică Militară „FERDINAND I” (RO); Ministerul Apărării Naționale prin Centrul de Cercetare și Inovare pentru Apărare CBRN și Ecologie (RO); Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO)

Affiliation:

Project website: https://romarm.ro/proiecte-cercetare/

Abstract:

Common unguided propulsion systems of great importance for any army include portable grenade/ missile launchers, rocket launchers placed on vehicles, aircrafts and boats. The main goal of this project is to recreate a vital capability of the national defense industry, by transferring from academia and research to the industrial partner C.N. ROMARM S.A. an innovative technology for the manufacture of a composite fuel for rocket engines, by development at industrial prototype level. The manufacture of the rocket fuels involve the use of an affordable oxidizer, with low sensitivity and minimal impact on the environment, and energy binder systems that can also include materials obtained by recycling PET. These new propellants have performances at least similar to those of double-based propellants (based on cellulose nitrates and glycerin trinitrate), while having a low sensitivity and a low impact on the environment. The solid composite fuel will have a dual use at national level in defense and civil propulsion applications, among which we mention the national system of interventions in the atmosphere with anti-hail missiles (also made by ROMARM SA), which currently uses obsolete and toxic fuels from import.

The consortium from the academic and research environment that developed and validated the experimental model and that will assist ROMARM SA in the development of this new technology encompasses prestigious institutions with long experience in research and development of military equipment and advanced materials: Military Technical Academy-Ferdinand I, Research-Innovation Center for CBRN Defense and Ecology and the National Research and Development Institute for Chemistry and Petrochemistry.

Ecotechnology for obtaining phytoingredients encapsulated in hydrogel based on bioactive complexes immobilized in a layer double hydroxide matrix Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2021-1870 2022 - 2024

Role in this project:

Coordinating institution: UNIVERSITATEA BUCURESTI

Project partners: UNIVERSITATEA BUCURESTI (RO); Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); CENTRUL DE CERCETARE SI PRELUCRARE A PLANTELOR MEDICINALE PLANTAVOREL SA (RO)

Affiliation:

Project website: https://www.chimie.unibuc.ro/cercetare/cataliza/PN-III-P2-2_1-PED-2021-1870/DUACTIVMER.pdf

Abstract:

The project aims the development of integrated validated eco-technologies (TRL4) with double action: 1) obtaining hydrogel encapsulated bioactive ingredients based on phytocomplexes from 2 medicinal plants (e.g. Rhamnus frangula L (RfL) and Helianthus tuberosus L (HtL)) with increased biocompatibility and protected from degradation by immobilization in a layer double hydroxide (LDH) matrix, and 2) valorization of spent vegetal after extraction as cheap adsorbent of pollutants from wastewaters. The basic concept of the technology (TRL2) lays on preliminary results obtained by consortium partners in: i) extraction of RfL and HtL phytocomplexes; ii) immobilization of different organic anions in Mg/Al-LDH and Zn/Al-LDH matrices, iii) obtaining of hybrid hydrogels containing bioactive phytoextracts from Rosa Canina and Hypericum Perforatum L immobilized in natural zeolite and iv) treatment of wastewaters polluted with heavy metals and organic pollutants. This project extends the application of double-protected bioactive phytoextracts to new systems based on RfL and HtL phytoextracts incorporated in Mg,Ca/Al,Fe-LDH matrices and further encapsulated into hydrogels. The integrated technology ensuring minimum waste production, will allow the further utilization of obtained active ingrediends in food supplements with benefic effects for improving a lazy intestinal transit due to a constant low apport of glucofrangulins brought by RfL along with electrolytes such as Mg/Ca and Fe, while acting also as prebiotic and promoter of mineral absorption and cholesterol-lowering due to HtL. A benefit for wastewater treatment would also be brought. The use of the obtained products in food supplements could be benefic to people well-being, by reducing the negative effects of their chaotic lifestyle, with too many working hours, continuous stress and most important, poor dietary decisions, all leading to tremendous repercussions on the health of the digestive system.

Synthetic nanogel antibodies molecularly imprinted with the Spike S1 protein Call name: P 1 - SP 1.1 - Proiecte de cercetare pentru stimularea tinerelor echipe independente - TE-2021
PN-III-P1-1.1-TE-2021-1239 2022 - 2024

Role in this project:

Coordinating institution: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti

Project partners: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO)

Affiliation:

Project website: https://icechim.ro/project/antispike-ro

Abstract:

SARS-CoV-2 is a new coronavirus type and it is responsible for causing COVID 2019 in humans, with very high contagion rate all over the world. The viral entry of SARS-CoV-2 is conferred by the presence of Spike S1 protein on the surface that can direct attachment and enter the plasma membrane of the human cell. The Spike protein through its location is a significant therapeutic target, and targetable using antibodies. Despite recent technological developments, effective and safe therapies are currently not available for treating the infected victims. Thereby, the general objective of the project targets the synthesis of synthetic nanogel antibodies molecularly imprinted with Spike S1 (MIP-SNAs) for recognizing and retaining coronavirus-originated Spike S1 proteins. In this respect, the MIP-SNAs are able to recognize and bond to the Spike S1 proteins, acting as nanogel caps, and thus inhibiting the activity of SARS-CoV-2 antigen to penetrate the human cells. Hence, ANTISPIKE holds significant influence upon the scientific community by new concepts and methodologies for ligand-free delivery systems as MIP-SNAs (short-term impact: scientific ISI papers and communications, and national patent claim) and by opening new research directions associated with the side-benefits of the research (like new immuno-therapies) as long term impact. Implementation of this project will also bring specific scientific, economic and social benefits at the national and international level.

Rational design of composite membranes for advanced heavy metal removal in wastewaters Call name: P 1 - SP 1.1 - Proiecte de cercetare pentru stimularea tinerelor echipe independente - TE-2021
PN-III-P1-1.1-TE-2021-0915 2022 - 2024

Role in this project:

Coordinating institution: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti

Project partners: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO)

Affiliation:

Project website: https://icechim.ro/project/ionmem-en/

Abstract:

Water pollution by heavy metal ions is becoming a major environmental problem because of the high toxicity of some of these elements and their tendency to accumulate through the food chain, affecting all living organisms in a given ecological system. The present project proposes a new concept for the water treatment membranes with improved features in terms of hydrophilicity, porosity and specific surface area and higher retention capacity at low concentration of heavy metal ions in effluent. In this respect, I-ON-MEM proposal describes a feasible and original method for preparing performant and low-cost composite membranes, based on functionalised MWCNTs and terpolymer formulations for advanced wastewater treatments. An original part of the project refers to selecting terpolymer formulations for preparing either 100% synthesic or biofriendly matrix. Another original aspect will be represented by addressing the possible effects of various functionalization agents and methods upon the WMCNT-copolymer compatibility pore size of membranes and retention efficiency of different heavy metals. Non-covalent functionalization of MWCNTs by surfactants and by silylation with various organosilica agents will be performed. The results will be disseminated as follows: at least 3 scientific publications in ISI journals; at least 3 scientific communications, and patenting of any original aspect.

Sustainable epoxy networks with tunable properties used as nanocomposite materials for coatings Call name: P 1 - SP 1.1 - Proiecte de cercetare pentru stimularea tinerelor echipe independente - TE-2021
PN-III-P1-1.1-TE-2021-0627 2022 - 2024

Role in this project:

Coordinating institution: UNIVERSITATEA POLITEHNICA DIN BUCURESTI

Project partners: UNIVERSITATEA NAŢIONALĂ DE ŞTIINŢĂ ŞI TEHNOLOGIE POLITEHNICA BUCUREŞTI (RO)

Affiliation:

Project website: https://damiancelinam.wixsite.com/greenanonet

Abstract:

The project “Sustainable epoxy networks with tunable properties used as nanocomposite materials for coatings” proposes a strategy to replace conventional epoxy resins from protective coatings, with epoxy derivatives from renewable resources, maintaining their thermal and mechanical performance. The main objective of the project GREENanoNET is the synthesis of new protective coatings based on epoxidized vegetable oils (EVO) as main or unique component, reinforced with new graphene oxide-layered silicate hybrids. The first stage is the synthesis of new nanohybrid structures from montmorillonite and amine functionalized graphene oxide through an innovative method. The second step aims to design epoxy networks by replacing conventional epoxy resin with EVO. This gradual strategy is concentrated to maintain the properties corresponding to the targeted applications. The third stage envisages the efficient dispersion of nanostructures within the new polymeric matrices, which will lead to an optimal properties transfer from the nanohybrids to the epoxy networks. Thus, the obtaned bionanocomposites will be a convenient alternative to comercially available materials, with major impact on the environment and also lower industrial costs. The GREENanoNET project will broaden the available raw materials for fire-retardant and corrosion protective coatings through the benefit of vegetable oils, clay and carbon derivatives.

RECYCLING CRUSTACEANS SHELL WASTES FOR DEVELOPING BIODEGRADABLE WASTEWATER CLEANING COMPOSITES Call name: P 3 - SP 3.2 - Proiecte ERA.NET - COFUND
COFUND-BLUEBIO-BIOSHELL 2020 - 2023

Role in this project:

Coordinating institution: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti

Project partners: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); EDAS-EXIM SRL (RO); Norwegian Institute of Bioeconomy Research (NO); University of Coimbra (PT); Brinova Bioquimica Lda. ID&T (PT)

Affiliation:

Project website: https://icechim.ro/project/bioshell-ro/

Abstract:

Wastes from agriculture and fishery cause harmful effects on the environment and implicitly on humans. But, many of these wastes can be recycled. One of the current global issues refers to minimizing waste production, effective wastewater treatment, biosafe food production, and reducing hazards from the exposure to pathogens. Most of the threatening microorganisms especially emerging pathogens (EPs) derive from wastewater. Moreover, antibiotics residues present in wastewater lead bacterial pathogens to develop antibiotic resistance genes (ARGs). In addition, heavy metals are among the most harmful non-microbial pollutants due to their toxicity to humans. BIOSHELL aims at synergistically solving economic, environmental and health problems. The project focuses on utilizing the wastes from sea food preparation such as crustacean carcasses in the development of innovative and efficient inorganic-organic functionalized hydrogel nanocomposites, suitable to facilitate the sustainable wastewater purification technologies about heavy metals retention, antibiotics elimination, EPs and ARGs removal.

Strippable coatings for heavy metals and radionuclids decontamination Call name: P 2 - SP 2.1 - Proiect de transfer la operatorul economic
PN-III-P2-2.1-PTE-2019-0400 2020 - 2022

Role in this project:

Coordinating institution: STIMPEX S.A.

Project partners: STIMPEX S.A. (RO); Academia Tehnică Militară „FERDINAND I” (RO); Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); Ministerul Apărării Naționale prin Centrul de Cercetare și Inovare pentru Apărare CBRN și Ecologie (RO)

Affiliation:

Project website: https://www.stimpex.ro/single-post/pelicule-detasabile-pentru-decontaminarea-metalelor-grele-si-radionuclizilor

Abstract:

The main objective of this project is represented by the transfer of an innovative decontamination technology that involves the utilisation of some strippable polymeric coatings for the decontamination of radioactive or heavy metals, from the academic research towards the industrial partner STIMPEX SA. This project idea appeared due to the extremely important problems related with environment protection, because every year increasing quantities of hazardous waste like radioactive or heavy metals are identified as result of the use of these contaminants in defense and security industry (primers, detonators), nuclear power industry, medicine, which lead to negative consequences. In order to reduce the harmful effects caused by these contaminants, this consortium aims to develop an innovative decontamination method for the surfaces. The polymeric films will be obtained on an industrial prototype scale, using a green synthesis method based on ecofriendly, biodegradable, nontoxic and low-cost raw materials. The synthesized decontamination solutions will be applied by spraying them over contaminated surface or they can be stretched with a roller or a brush and after drying, the resulting films can be removed by their simple exfoliation, thus removing also the contaminating agent embedded in their polymeric matrix.

Environment friendly technology for obtaining polyester polyols for polyurethane spray foams from PET wastes and renewable raw materials Call name: P 2 - SP 2.1 - Proiect de transfer la operatorul economic
PN-III-P2-2.1-PTE-2019-0355 2020 - 2022

Role in this project:

Coordinating institution: INSTITUTUL DE CERCETARI PRODUSE AUXILIARE ORGANICE S.A.

Project partners: INSTITUTUL DE CERCETARI PRODUSE AUXILIARE ORGANICE S.A. (RO); INSTITUTUL DE CHIMIE ORGANICĂ ŞI SUPRAMOLECULARĂ "COSTIN D.NENIŢESCU" (RO); Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO)

Affiliation:

Project website: https://icpaomedias.ro/index.php/proiecte-in-derulare/ecorepol

Abstract:

The present project proposal refers to developing on industrial pilot scale of an ecological technology for the synthesis of oligoester-polyols with tailored chemical structure and designed properties, so that they are suitable for use as intermediates in rigid polyurethane foams (PURs) formation, by chemically recycling. polyethylene terephthalate (PET) wastes, using as cleavage and / or chemical modification agents renewable co-monomers, or which can be obtained from renewable materials by biochemical and / or chemical processes, in the presence of organic catalysts, in order to increase the process performance and energy efficiency, and to avoid contamination of products with heavy metals.

The laboratory technology for the synthesis of polyester-polyols from PET waste and renewable materials, in the presence of organic catalysts, was developed by the Center for Organic Chemistry CD Neniţescu of the Romanian Academy (CCO) and the National Institute for Research and Development for Chemistry and Petrochemistry (ICECHIM), in collaboration, within a PN-II project and, based on it, a patent application has been submitted to OSIM.

The project aims to improve the technology, in the sense of maximizing the PET waste and renewable monomers content of the chemical composition of polyester-polyols and optimizing the reaction parameters for maximum economic and energy efficiency of the process, as well as the development and validation of the technology at industrial pilot level to the economic agent partner, the Research Institute for organic auxiliary products (ICPAO) Medias, by demonstrating the functionality in real operating conditions, testing the product in polyurethane spray foams formation under real working conditions (performed by a polyurethane spray foams producer as service employed with third parties), and validating the classification of their characteristics into those of standard PUR spray foams.

Screen-Printed Hybrid Electrodes for Detecting and Monitoring Lipopolysaccharides Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2019-2443 2020 - 2022

Role in this project:

Coordinating institution: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti

Project partners: Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); UNIVERSITATEA POLITEHNICA DIN BUCURESTI (RO); EPI-SISTEM S.R.L. (RO)

Affiliation:

Project website: https://icechim.ro/project/toxisens-en/

Abstract:

The project TOXINSENS refers to designing innovative, versatile and re-usable biosensors for the fast, qualitative and quantitative detection and monitoring of lipopolysaccharides (LPS- endotoxin derived from Gram-negative bacteria, GNB) in various biological, food or water samples. For this matter, a medium consortium was created taking into account the project interdisciplinary and complexity, which includes the Project Coordinator ICECHIM that owns the background of the Concept approached in this project proposal, a Partner with state-of-the art facilities for characterisation i.e. UPB and a SME Partner-EPI SISTEM SRL capable of testing the project prototypes, adsorbing the know-how of manufacturing and commercialise the resulted LPS-biosensors. The project on-set refers to the following bioinspired concept: Methodology for the preparation of LPS-sensitive films-TRL 2. The concept was originally proposed by the Project Leader and developed within the Advanced Polymer Materials & Polymer Recycling Group from ICECHIM on project TE123/2018 BACTERIOSENS. Starting from this point, TOXINSENS targets first the upgrade of this former concept by addition of electro-active nanoparticles to the precursor films solution. In this way, an electro-active hybrid paste will be generated and used to print LPS-hybrid films directly on blank ceramic electrodes (TRL 3). The prepared LPS-Screen-printed hybrid electrodes will be further tested in laboratory-relevant environments and the innovative technologies will be thus validated (TRL 4). The specific output of the project will lead to several outcomes during project implementation (short-term scenario: at least 3 publications, 3 communications at prestigious Symposia or Congresses and 1 patent claim), and also after project end (long-term scenario: research and development roadmaps, performance data, transferable knowledge).

Smart materials for medical applications Call name: P 1 - SP 1.2 - Proiecte complexe realizate in consorții CDI
PN-III-P1-1.2-PCCDI-2017-0407 2018 - 2021

Role in this project:

Coordinating institution: UNIVERSITATEA POLITEHNICA DIN BUCURESTI

Project partners: UNIVERSITATEA POLITEHNICA DIN BUCURESTI (RO); CENTRUL DE CHIMIE ORGANICA AL ACADEMIEI ROMANE "C.D.NENITESCU" (RO); UNIVERSITATEA DE MEDICINA SI FARMACIE "CAROL DAVILA" (RO); UNIVERSITATEA BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE - DEZVOLTARE CHIMICO - FARMACEUTICA - I.C.C.F. BUCURESTI (RO); Institutul National de Cercetare-Dezvoltare pentru Chimie si Petrochimie - ICECHIM Bucuresti (RO); UNIVERSITATEA DE MEDICINA SI FARMACIE "GRIGORE T. POPA" DIN IAŞI (RO); INSTITUTUL NATIONAL DE CERCETARE DEZVOLTARE PENTRU FIZICA LASERILOR, PLASMEI SI RADIATIEI - INFLPR RA (RO); UNIVERSITATEA DE MEDICINA SI FARMACIE "IULIU HATIEGANU" (RO)

Affiliation:

Project website: https://intelmatupb.wixsite.com/intelmat

Abstract:

INTELMAT project represents advanced research in the field of synthesis and application of smart materials for medical engineering in order to solve essential features of some acute/chronic diseases of large occurrence. 5 thematic directions are taking into consideration: 1. Developing of a controlled-release system of complex micro-colloidal architectures based on bacterial cellulose and hydrogels used for management of chronically wounds which aims to overcome the limitations of classical treatments; 2. Developing of new biomaterials specially designed with targeted action for treatment of inflammatory diseases of gastrointestinal segment; 3. Synthesis of new generation of composite membrane materials for artificial kidneys based on biocompatible polymers and derivative graphene; 4. Developing of some auto-assembly 3D platforms with controlled-released drugs based on polymeric nanoparticles and composite nanogels for the therapy of colon-rectal cancer; 5. Developing of innovative technologies for the synthesis of some 1D nano-architectures (nanowires) with controlled morphology, with applications in producing of non-enzimatic electrochemical biosensors.

FILE DESCRIPTION	DOCUMENT
List of research grants as project coordinator or partner team leader
Significant R&D projects for enterprises, as project manager
R&D activities in enterprises
Peer-review activity for international programs/projects