BrainMap

Mrs. Adela BĂRA

Dr.

- INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI

Researcher | Scientific reviewer | Manager

Web of Science ResearcherID: not public

Curriculum Vitae (17/09/2024)

Expertise & keywords

Self-regulating temperature heating cable for home heating and preventing ice formation on building's adjacent surfaces Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2019-3073 2020 - 2022

Role in this project:

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI

Project partners: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); ICPE S.A. (RO); UNIVERSITATEA POLITEHNICA DIN BUCURESTI (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://www.icpe-ca.ro/cablu-de-incalzire-cu-autoreglare-termica-pentru-incalzirea-locuintelor-si-prevenirea-formarii-ghetii-pe-suprafetele-adiacente-cladirilor-acronim-smarthc/; http://www.icpe-ca.ro/smarthc-446ped-2020/?lang=en; http://www.icpe.ro/ro/smar

Abstract:

The aim of the project is to obtain and to demonstrate the functionality of an innovative conductive composite material having a positive temperature coefficient (PTC) effect, recently developed as an optimized experimental model within the ICPE-CA and the exploitation of the results obtained so far by developing a model with direct practical applicability, with the prospect of being introduced into manufacture, namely a heating cable with self-regulating temperature properties. The key element of the proposed cable is the mentioned conductive composite material that produces heat through the Joule effect and is able to self-regulate its temperature by electric percolation-depercolation effects at a certain temperature specific to the respective material. Such a cable can be integrated into interior (floor) or exterior (paving, roof) construction elements to ensure a certain constant ambient temperature of the house and to prevent the formation of ice, respectively. Therefore, within the project it is proposed the experimental realization, based on a laboratory technology, of a heating cable model with self-regulating temperature effect and testing of its functional characteristics. The results will be useful for demonstrating the functionality of the model and will allow the transition to a higher stage in results exploitation by their transfer to a manufacturer.

Microwave absorber hybrid structures based on ferromagnetic grafted graphene derivatives Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2019-4670 2020 - 2022

Role in this project: Key expert

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI

Project partners: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); ROSEAL S.A. (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://www.icpe-ca.ro/mw-absorber/ ; http://www.roseal.eu/MWAbsorber/

Abstract:

With the accelerated progress of science and technology from the last decades, more and more electrical equipments and information systems have been used in different domains. However, such equipments and systems cause electromagnetic radiation that is harmful to the health and affects the normal working of electronic equipments, through interferences. The idea of the proposed project occurs as answer to the necessity to identify and develop new composite structures that allow the reduction, by absorption, of the radiation level and improve the operating, by eliminating interference. The microwave absorbing materials plays an increasing significant role in national defence security, health, electronics reliability.

It is well known that the incidence of professional diseases in the case of the personnel operating near the powerful radars is highly increased, hence the need to identify and develop highly efficient microwave absorbing materials, especially for the specific radar radiations, around the frequency of 3 GHz.

The project aims and proposes to design (TRL 2), develop (TRL 3) and validate at the laboratory scale (TRL 4) a demonstration model of hybrid structures, based on ferromagnetic grafted graphene derivatives, produced by chemical synthesis, with the aim to be used as microwave absorbers.

The project aims also, at the end of proposed activities, to develop in the future projects these hybrid structures, up to higher TRLs, and to set-up a technology for production of these new functional mats, adequate for a future technological transfer to the industrial partner, ROSEAL company.

High optical transparency thin films obtained by vacuum deposition of conductive oxides for anti-static applications and broadband protection against electromagnetic interference Call name: P 2 - SP 2.1 - Proiect de transfer la operatorul economic
PN-III-P2-2.1-PTE-2019-0763 2020 - 2022

Role in this project:

Coordinating institution: MGM STAR CONSTRUCT S.R.L.

Project partners: MGM STAR CONSTRUCT S.R.L. (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU OPTOELECTRONICA INOE 2000 INCD (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://thinsafe.mgmstar.ro/

Abstract:

Reducing electromagnetic interference over a broad band of radio frequencies is crucial to eliminate the adverse effects of the increasingly complex electromagnetic environment. Current shielding materials or methods suffer from tradeoffs between optical transmittance and EMI shielding capability. Moreover, poor mechanical flexibility and manufacturing complexity significantly limit their additional applications in flexible electronic devices. In this project a technology will be developed to manufacture transparent conductive thin layer structures with thicknesses of max. 600 nm, with a surface resistance of max. 100 ohms / square for a shielding efficiency of at least 25 dB and for anti-static effect with a surface resistance of maximum 1000 ohms / square, on flexible and rigid transverse substrates for transmissions in visible of at least 80%. Transparent EMI shielding components will be made and tested. The thin layers of electromagnetic protection will be made in the form of a suitable design (eg conductive-dielectric-metal-dielectric) to improve the electro-optical compromises, to obtain a transmittance in the visible spectrum of at least 80% in relation to the substrate and an excellent efficiency. of shielding effect (SE-shielding effectivnes)> 25 dB, over a broadband bandwidth of up to 30 GHz, covering all bands X, Ku, Ka and K. An efficiency of EMI shielding> 30 dB is estimated to be achieved by the overlap of at least two transparent conductive thin layers and could be further improved up to 50 dB by separating two layers with a quarter-wavelength space. High-performance flexible or rigid substrate thin-layer structures have high potential for various applications such as: portable electronics, medical devices and electronic safety zones.

HOLISTICS OF THE RENEWABLE ENERGY SOURCES ON ENVIRONMENT AND CLIMATE Call name: P 1 - SP 1.2 - Proiecte complexe realizate in consorții CDI
PN-III-P1-1.2-PCCDI-2017-0404 2018 - 2021

Role in this project:

Coordinating institution: UNIVERSITATEA MARITIMA DIN CONSTANTA

Project partners: UNIVERSITATEA MARITIMA DIN CONSTANTA (RO); INSTITUTUL DE GEOGRAFIE (RO); UNIVERSITATEA "ŞTEFAN CEL MARE" DIN SUCEAVA (RO); UNIVERSITATEA POLITEHNICA DIN BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU ELECTROCHIMIE SI MATERIE CONDENSATA - INCEMC TIMISOARA (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); UNIVERSITATEA TEHNICA DIN CLUJ - NAPOCA (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: https://cmu-edu.eu/horesec/

Abstract:

The HORESEC project supports intelligent specialization in the energy field through a holistic analysis of renewable energy sources impact on climate change and on each other, fulfilling the objectives of sustainable development as well as advanced and progressive knowledge. Accelerate integration of RES set a new world record regarding grid’s capacity to absorb intermittent energy, which is specific to renewable energy production, was driven by a fast reduction of related technologies expenses. Increased share of RES in energy production greatly complicates the operation of current systems requiring new long-term storage solutions, developed in the HORESEC project. It will be carried out on a pilot plant test solutions for dynamic adaptation of the system to increase RES share in the energy production, including long-term storage solutions. The objectives are: Establishing the main climatological and environmental parameters with impact on RES and reciprocally. By realizing the mathematical model of the analyzed factors evolution, will be identified the climatological, environmental and social indicators associated with the RES dynamics, which will be subsequently verified on the developed pilot installation; Efficiency of energy production through new technologies and algorithms to optimize the RES response by developing new methods and measurement models; By analyzing complex compounds of biofuels, will be defined a matrix of biofuels, which shall be tested on a pilot combustion plant and on a diesel engine with the aim of obtaining new patentable technologies. The use of biomass will take place in an integrated stream with the production and storage of hydrogen and methanisation and ultimately sustainable reduction of CO2 emissions; Finding innovative storage solutions for medium and long term; Demonstration of project feasibility through experimental determinations on a pilot plant, facilitating the acquisition of research results by the industrial environment.

SOL-2020-26. Decontamination devices against SARS-CoV-2 virus (UV, microwaves, X-rays,biochemicals, nanoparticles, other) Call name: P 2 - SP 2.1 - Soluţii - 2020 - 2
PN-III-P2-2.1-SOL-2020-2-0285 2020 - 2020

Role in this project: Key expert

Coordinating institution: INSTITUTUL DE STIINTE SPATIALE-FILIALA INFLPR

Project partners: INSTITUTUL DE STIINTE SPATIALE-FILIALA INFLPR (RO); INSTITUTUL NATIONAL DE CERCETARE DEZVOLTARE PENTRU FIZICA LASERILOR, PLASMEI SI RADIATIEI - INFLPR RA (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE - DEZVOLTARE PENTRU FIZICA MATERIALELOR BUCURESTI RA (RO); SPITALUL CLINIC DE URGENŢĂ "PROF. DR. NICOLAE OBLU" IAŞI (RO)

Affiliation:

Project website: http://www.spacescience.ro/projects/sol2020/sol_index.html

Abstract:

In this project, the consortium consisting of the Institute of Space Science - legal subsidiary of INFLPR (PC), the National Institute for Lasers, Plasma and Radiation Physics (P1), the National Institute for Research and Development in Electrical Engineering ICPR-CA (P2), the National Institute of Materials Physics (P3) and the Iasi "Prof. Dr. Nicolae Oblu" Emergency Hospital proposes the development and fabrication of the following prototypes of decontamination devices: (a) a prototype of a mobile UVC device for the patyhogenic decontamination of exposed surfaces, objects and air in closed rooms semi-closed spaces (halls, etc), (b) a prototype of a mobile/fixed UVC tunnel/chamber for pathogen decontamination, (c) a prototype of a 2-stage microwaves generator for air decontamination in closed spaces, (d) at least one prototype of nanoparticles colloidal solution with possible wide spectrum biocidal properties using on metalic oxide nanostructures (single components/composites) and nanostructured composites based on oxide nanostructures and UV activated carbon nanoparticles. These prototypes will be tested both in a laboratory environment and in a typical hospital environment in order to achive a technology readiness level of TRL=8 for each. As a result of these testing campaigns, the two UVC decontamination prototypes, the microwave decontamination device as well as the most efficient prototypes of colloidal decontamination solutions based on nanoparticle oxides and on nanostructures and nanostructured composites will proposed for formal operational certification.

Dye Sensitized Solar Cells With Integrated 3D GraphEne sTructures Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2016-1159 2017 - 2018

Role in this project: Key expert

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI

Project partners: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE- DEZVOLTARE PENTRU MICROTEHNOLOGIE - IMT BUCURESTI INCD (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://www.icpe-ca.ro/proiecte/proiecte-nationale/pn-2016-2020/widget/widget.htm

Abstract:

The large concern of global energy challenges has greatly increased the interest and investments in renewable and clean energy that can replace fossil fuel. Among all known systems to generate energy, solar power is the most promising one. Hence, no one doubts the important role that photovoltaics (PV) are going to play in the energy of the future. The main drawbacks of the current PV technologies are their high production cost and rigid structure in the case of traditional silicon and inorganic semiconductors, or their reduced efficiency and durability in the case of organic and DSSC photovoltaics. One of the bottlenecks of increasing the conversion efficiency in DSSC is the transport of photogenerated electrons. The general approach to surpass these limitations is employing one of the following strategies: doping, growing vertically oriented porous structures on top of the conducting substrate, interconnecting TiO2 nanoparticles with charge carriers to direct the photogenerated current or find alternative materials with higher electronic mobility. Due to the richness of its optical and electronic properties, 3D graphene is the material of choice for our proposed studies. The ability to develop free-standing 3D graphene structures with large specific surface area will enable the successful realization of fast transport channels of charge carriers, thus leading to high electrical conductivity. Moreover, by combining their good electrical conductivity with their porous structure, the 3D graphene structures will increase the photocurrent density of DSSC by enhancing light absorption (sensitizer loading), enabling efficient charge separation and light scattering. In this context, the general objective of the project is: to evaluate the functionality of the 3D graphene structures in optoelectronic devices, specifically in photovoltaic cells (DSSC).

Fabric FILter media conTaining fibrous polymer layers produced by ElectRospinning Call name: P 2 - SP 2.1 - Proiect experimental - demonstrativ
PN-III-P2-2.1-PED-2016-1538 2017 - 2018

Role in this project: Project coordinator

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI

Project partners: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU TEXTILE SI PIELARIE - INCDTP BUCURESTI (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://www.icpe-ca.ro/proiecte/proiecte-nationale/pn-2016-2020/filter/filter.htm

Abstract:

Proiectul propune designul conceptual (TRL2), dezvoltarea (TRL3) si validarea la scala de laborator (TRL4) a unui model demonstrator de mediu de filtrare textil cu straturi micro sau nanometrice realizate prin electrofilare, pentru separarea particulelor in suspensie din solutii apoase. Proiectul FILTER furnizeaza medii de filtrare multistrat imbunatatite, ce includ o structura textila mono sau multistrat, un strat subtire din fibre polimerice electrofilate si un invelis protector dintr-un strat continuu de fibre. Structura cu 3 straturi a mediilor de tesaturi filtrante avute in vedere vor fi caracterizate prin eficienta ridicata de captare a particulelor si o restrictie minima a curgerii. Proiectul furnizeaza un nou concept pentru mediile de filtrare pe baza de tesaturi foarte subtiri ce permit utilizarea mai multor straturi functionale/unitatea de volum si au o eficienta imbunatatita. Principalele obiective: (i)design conceptual si demonstrarea funcționalității conceptului pentru modelul demonstrativ de mediu de filtrare textil cu straturi polimerice electrofilate/strat de acoperire si structuri textile inovative cu dublu rol (ranforsare si filtrare); (ii) dezvoltarea si validarea in laborator a modelului demonstrator de medii de filtre tesutura cu straturi polimerice electrofilate. Latura inovativa a cercetarilor ICPE-CA consta in sinteza/caracterizarea de micro(nano) fibre electrofilate, selectate in functie de utilizarea materialului in filtrarea solutiilor apoase. Latura inovativa a cercetarilor INCDTP se reflecta in dezvoltarea structurii textile mono si multistrat cu componenta cu dublu rol pentru filtrul flexibil compozit: structura textila este realizata astfel incat sa asigure o comportare uniforma a filtrului compozit flexibil in timpul utilizarii si mentinerea unui strat superficial suport al micro si nanofibrelor; compozitia structurii textile va fi completata cu un strat de fibre electrofilate astfel incat sa asigure functii optime de filtrare.

Innovative nanostructured materials and coatings with antimicrobial activity for medical applications Call name: Joint Applied Research Projects - PCCA 2013 - call
PN-II-PT-PCCA-2013-4-1292 2014 - 2017

Role in this project:

Coordinating institution: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI

Project partners: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); UNIVERSITATEA BUCURESTI (RO); MGM STAR CONSTRUCT S.R.L. (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://www.icpe-ca.ro/proiecte/proiecte-nationale/pn-2014/inmatco.pdf

Abstract:

The project aims to develop novel products and knowledge in antimicrobial nanostructured coatings for medical applications like critical surgical instruments (scalpels, knives, forceps and scissors) to reduce superficial and deep surgical site infections and to improve quality of life. Nanostructured materials of MeNPs/MeONPs type (MeNPs = Ag, Cu, MeONPs = CaO, MgO, ZnO, TiO2) with average MeNPs size of 10-20 nm and average MeONPs size of 30-50 nm) and high antimicrobial activity will be obtained by an innovative chemical synthesis of colloidal suspensions containing ecological NPs with 0.1-0.5 wt.% MeNPs and 1-3 wt.% MeONPs. Chemical deposition of MeNPs on MeONPs supports will be realized by a self-assembled nanolayers coating process, being a new and efficient approach in control of NPs size and stability. A higher content of MeNPs will be obtained in comparison with the existent solutions. The MeNPs and MeONPs mixtures will show synergistic effects of antimicrobial properties compared with those of MeNPs and MeONPs used alone. Ecological and efficient processing methods will be used to obtain and deposit the bioactive agents designed to inhibit the adhesion of microorganisms on stainless steel supports that show lack of antibacterial properties. The MeNPs/MeONPs composite powders will be deposited by different methods such as Thermal Evaporation, EBPVD (e-gun), Sputtering Deposition (Magnetron) and Arc-PVD (Plasmotron) on the metallic substrates with ensuring a good adhesion without changing the substrates original properties. Nanostructured coatings with homogenous and dense surface without any faults (pinholes and cracks) will be achieved at low temperatures to not affect the materials properties. Optimized coatings will be developed by a graded structure and adjusting stress level. Other original and innovative aspect is related by sputtering targets development from selected nanostructured materials by spark plasma sintering (SPS) process, where nanostructure features are maintained since grain growth and the development of equilibrium states are suppressed. The project addresses to the priority thematic of the PARTNERSHIPS PN-II-PT-PCCA-2013-4 program, Domain 7. “Materials, processes and innovative products“, Research field 7.1 Advanced materials, Thematic Area 7.1.6. “Advanced materials and biomaterials for health quality increasing“ with a direct impact in Domain 4. “Health” and European Research Area (ERA)-Nanomaterials. The project has inter-disciplinary, multi-disciplinary and trans-disciplinary nature being carried out by high skilled specialists with complementary expertise. Certified prototypes and end-products of critical stainless steel surgical instruments coated with antimicrobial MeNPs/MeONPs nanostructured materials with uniform and homogeneous mono/multilayer with thickness ranging 0.1-50 µm will be obtained. The coatings will have high resistance to mechanical wear, high resistance to heat stresses, high hardness, low friction coefficient and good adhesion to substrate. The novel products will be introduced on the market only after their certification granted by the Health Ministry from Romania. The coated products will be at a competitive cost with uncoated ones, contributing to the requests of the global and national socio-economic environment in the field of advanced materials and health with a major impact in reducing surgical site infections. Knowledge protection will be made by two patent applications registered to the national State Office for Inventions and Trademarks (OSIM). Results dissemination will be made on a large scale by publishing scientific papers in ISI ranked journals, attendance at national and international events, setting up and updating project web site, elaboration of dissemination materials.

Mortar systems composite microspheres based for bricklaying, plastering and protection Call name: Joint Applied Research Projects - PCCA 2013 - call
PN-II-PT-PCCA-2013-4-0945 2014 - 2017

Role in this project:

Coordinating institution: UNIVERSITATEA TEHNICA DE CONSTRUCTII BUCURESTI

Project partners: UNIVERSITATEA TEHNICA DE CONSTRUCTII BUCURESTI (RO); INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO); CEPROCIM S.A. (RO)

Affiliation: INSTITUTUL NATIONAL DE CERCETARE-DEZVOLTARE PENTRU INGINERIE ELECTRICA ICPE - CA BUCURESTI (RO)

Project website: http://www.ceprocim.ro/activitati/proiecte/smcm/

Abstract:

An important role in sustainable development and energy efficiency of buildings have building materials. European directives related strategies include building energy efficiency, durability and functionality of the materials used in residential and industrial buildings.

The use and development of new construction materials aims to improve the energy efficiency of buildings and at the same time, producing environmental and life quality improvements. The choice of materials for use in masonry and plaster work, is done according to the structure of the building, heating needs, the condition of buildings, the quality of the construction materials.

Building insulation is very important in reducing energy losses in noise reduction and at the same time to achieve a thermal and aesthetics comfort.

In this context, it is proposed the development of mortar systems based composite microspheres used in masonry and development of composite materials with microspheres (plaster) used in the building envelope and protection. These materials will provide high thermoinsulation by the heat reflecting properties, simultaneously with a good sound insulation of building. This will make composite mortar materials for plastering containing added inorganic mircosfere with micro-and nanostructured cavity closed and vacuumed pores (to provide enhanced thermal insulation by "thermos" effect and sound vibrations reduction).

Composite materials systems will have the following properties: low thermal conductivity (at least 10 times less than the usual materials known), a high resistance to ultraviolet and infrared radiations as well as sound absorbing.

To achieve the main objectives, the project will focus on two lines of research:

- development of inorganic hollow micro and nanospheres with closed and vacuumed pores (to provide enhanced thermal insulation by "thermos" effect) which generates multiple materials physicochemical properties: having a low thermal conductivity (0.1-0.5 W/m/oK) reduces energy transfer, reduces (35-85% UV) action and protects against sound vibrations;

- achieving masonry mortars and plastering mortar containing added inorganic microspheres and nanospheres used in building envelope to improve indoor microclimate and reduce energy consumption.

For achieving and testing innovative proposed materials provides:

- selection, synthesis and complex characterization of materials used for the microspheres and composite systems mortars and plasters;

- establishment and characterization of the addition of microspheres and nanospheres with thermo insulating role cavity;

- establishing the structure/composition of the composite systems to ensure appropriate set of properties;

- development of protecting composite mortars and plasters and their characterization (compressive strength, adherence to the substrate, the thermal conductivity, the absorbing character for the sound radiation);

All of the above are expected to be achieved by the experimental model, functional model, the development of technical specifications for each material made.

It also, dissemination of the results by publishing the articles in professional journals and attending scientific meetings.

FILE DESCRIPTION	DOCUMENT
List of research grants as project coordinator or partner team leader
Significant R&D projects for enterprises, as project manager
R&D activities in enterprises
Peer-review activity for international programs/projects